Create a cannon projectile simulation using Intellij

Implement your initial design to meet the following requirements. -- initial design for the project is attached

1) Prompt the user for the input of initial speed, the height of the barrel, and the angle of the barrel with the ground.

2) Output the CSV file for the simulation from t=0 (time the projectile leaves the barrel) to the time it reaches the ground.

3) report the maximum height reached by the projectile, and the time and xPosition, at which this occurs for each run.

4) Provide plots and results for the runs with 100 m/s, [30,45,60 degrees],10m high.

5) Modify the program and provide a plot and results for the case with the acceleration in the x direction = 10m/s^2 toward the cannon for 5 milliseconds (then ax = 0) starting at t=0.015 seconds. (you may need to adjust the time step). Repeat step 4

Write up your solution and provide commented program listings. You should provide a video with your testing/discussion of the program. You can submit a zip of the folder which contains your project and documentation.