Do My Homework / Homework Help Answers / Other Subjects Homework Help / Research project and report (Mining engineering)

Research project and report (Mining engineering)

Need help with this question or any other Other Subjects assignment help task?

Hi, I have attached my assessment work. All details are in this file,kindly look and tell me would you be able to do this? how much would you charge I need this assignment at least on 4th Oct,
Additional Instructions:
Submission: An electronic original WORD file must be submitted via the Moodle link. Part 1 Research report (10 marks): Select one of the following projects. Option1: Report an engineering application of data analytics which you experienced or by which you are impressed. Option 2: Report a mine development which you experienced or by which you are impressed. Requirements about the report are: · Individual formal academic report, including: · For Option1, a brief introduction (1 mark), methods used (2 marks), major processes of the project development (2 marks), benefits (1 mark), limitations (1 mark), and other significant aspects during the life cycle of the project. (2 mark). · For Option 2, a brief introduction (1 mark), orebody and mining method (2 marks), major processes of the development (2 marks), ventilation, mucking, ground control, drainage control, etc significant aspects during the life cycle of the project (4 marks). · No more than six A4 pages including the references, excluding the cover page (1 mark for length and format). · Adequate citations are mandate. Please note “Copy and Paste” is plagiarism (please refer to the course description on Moodle for details). · Submit on or before the due date through Moodle. Penalty applies for late submission (please refer to the course description on Moodle for details). Part 2 Research project (20 marks): Project information: Select one deposit from the deposits given below as your design project information. Deposit 1: A seam like deposit of gypsum, ranging in thickness from 2.5 to 3.5 m. the total area of the deposit is 10km2. It outcrops at surface at the northern end of the mine lease and dips in a southerly direction at 3°. The floor strata is a mudstone and the roof consists of a well consolidated sandstone. Deposit 2: A coal seam 2.5 m thick, located 1000m underground. Dip is about 2°. The mining lease is located in mixed rural and urban area. The coal is underlain by a reasonably competent mudstone and overlain by a series of typical coal measures strata. Underlying and overlying the seam are a number of very thin < 20cm thick coal seams within 200m of the seam to be mined. Deposit 3 A massive porphyry style deposit located at high altitude in West Papua. Average grade of the deposit is 0.5 g/t Au and 0.8 % Cu. The deposit has a UCS of 200MPa and is highly fractured; country rock is similar in nature. The deposit has a large foot print area 200m by 400m and is located 300m from surface and open at depth. Requirements: You are required to do a major underground mine development plan and the initial (first) underground development design, specifically as follows. 1. Of the mining methods you proposed for this deposit, decide a most adequate mining method and further propose an adequate annual production rate. (Key points to address in this part, (1) if the mining method is optimal and (2) if the production rate is adequate.) (5 marks) 2. Propose a mine development plan for the deposit. (Key points to address in this part, (1) if the plan is rational and (2) if the production rate can be facilitated.) (5 marks) 3. Select and Design one of the major underground developments to access the orebody (Key points to address in this part, (1) if the design is rational and (2) if it can facilitate the production rate required.) (10 marks). This part should include: · Specify the development selected, · Design its cross section to meet the production rate, · Verify the cross section to meet the ventilation requirement, · Excavation strategies and designs (including rock breakage, ventilation, mucking, drainage control and ground support designs), and · Any other salient points. Note: students should list any assumptions made. Your report must be typed and finished in a professional manner with all references acknowledged, and bear in mind that a report such as this would not be complete without drawings, sketches, etc. Please note that COPY and PASTE is plagiarism. Useful sources of information include the University library, websites, Mining Monthly and other journals.
There are no answers to this question.
Login to buy an answer or post yours. You can also vote on other others

Get Help With a similar task to - Research project and report (Mining engineering)

Related Questions

Similar orders to Research project and report (Mining engineering)
Popular Services
Tutlance Experts offer help in a wide range of topics. Here are some of our top services: